Pushnuts are a simply applied push on fastener. Capable of giving a quick, secure fastening on a plain shaft. No need for costly grooving or threading, these push nuts are a time-saving cost-efficient fastener. So secure that the pushnut cannot be removed without destroying the fastener.

Top Hat Pushnuts - Metric

Top Hat Pushnuts cover the end of a rod or stud with a neat, smooth cap and provide a safe, economical fixing for castors, rollers and wheels of all kinds.

These parts are fast to apply and simple to push on, simply align with the shaft and tap on with a lightweight mallet.

Typical applications of these push  [....]

More details

Top Hat Pushnuts - Imperial

Top Hat Pushnuts fasten securely to the end of a rod or stud. They have a rounded smooth cap and provide a safe, economical fixing on the axles of all kinds of wheels.

These fixings simply push on making them fast to apply and the internal protrusions hold it firmly in place . The nuts automatically align square wit  [....]

More details

Flat Round Pushnuts - Metric

This pushnut is the most economical fastener of its kind on the market. It provides a good balance between maximum holding strength and reasonable push on force.

Pushnuts can be applied with maximum speed, since pushing on (especially with an air hammer) is much faster than running down nuts. These fasteners are es  [....]

More details

Flat Round Pushnuts - Imperial

This type of pushnut is designed to strike a good balance between maximum holding strength and a reasonable push-on force. Along with the metric version it is the most economical fastener of its kind available.

Pushnuts can be applied very rapidly. Pushing this fastener onto a rod (especially with an air hammer) is  [....]

More details

Spiderfixes - Uncapped

Uncapped Spiderfixes are used for retaining components to shafts, tubes and studs in the manufacture of prams, toys, household appliances, trolleys and vehicles.

Where a more decorative part is required, Spiderfixes are available with a brightly finished cap.

Typical applications include toys, trolleys, axle  [....]

More details

Spiderfixes - Capped

These Capped Spiderfixes are used for retaining components to shafts, tubes and studs in the manufacture of prams, household appliances and in the automotive industry.

Typical applications include toys, trolleys and axles.

Material - Austempered Carbon Steel.

More details

Toothed Retainer Washers

Toothed Retainer Washers are used for retaining components to shafts, tubes and studs in the manufacture of prams, toys, household appliances, trolleys and vehicles.

Typical applications include toys, trolleys, rollers and furniture.

Material - Austempered Carbon Steel.

More details

Bolt Retainers

These Bolt Retainers are designed to be pushed onto a screw or bolt to prevent it from falling out of a hole while en-route to final assembly. They slide smoothly down either fine or coarse pitched threads and hold firmly at any point.

When a panel or component is then installed and fastened with a nut, the retainer is  [....]

More details

On-Sert Fasteners - Self-Tapping Threads

On-Serts are installed by pushing the part over a plastic boss thus reinforcing it in order to resist screw pull-out and prevent splitting by the self-tapping screw.

Typical applications include plastic assemblies, toys, motor vehicles fittings, telecom equipment, machinery and electrical equipment.

Material -   [....]

More details