A comprehensive range of fasteners and components for furniture assembly.

Cabinet Connectors - Twinbloc

A one-piece knock down connector which is ideally suited for applications where speed and simplicity are essential but a concealed fixing is not necessarily required. A strong joint is achieved by knocking the dowel feature home then tightening the pre-assembled screw into the mating panel. A 30° screw angle creates more room fo  [....]

More details

Cabinet Connectors - Minibloc

A one-piece knock down connector which requires face-drilling only. This minibloc is easy to use and fool proof for home insertion, the angle drive screw tolerates good levels of inaccurate drilling increasing consumer confidence. A strong joint is achieved by knocking the dowel feature home then tightening the pre-assembled scr  [....]

More details

Shelf Support - Diecast Push-In

The die cast zinc alloy shelf support simply pushes into a pre-drilled hole. The visible portion of the support is pleasingly symmetrical and slim whilst providing a good support for the shelf.

Material - Diecast Zinc Alloy.

D = Hole Diameter

More details

Shelf Support - Diecast Rock-In

The pin on this shelf support is rocked into the pre-drilled hole on the vertical surface of the shelving unit. The teeth on the upper side of the pin grip into the hole when the weight of the shelf is placed on top of the shelf supports.

Material - Diecast Zinc Alloy.

D = Hole Diameter

More details

Shelf Support - Diecast Rock-in with Pin

This metal shelf support comes with two pins as part of its design. Firstly one pin is rocked into a pre-drilled hole in the vertical surface. Secondly, the panel for the shelf has pre-drilled holes to accommodate the vertical pin on the top of the shelf support. This gives a stable support whilst still allowing the shelf to be   [....]

More details

Shelf Support - Diecast Screw-On

This metal shelf support comes with two pins as part of its design. Firstly one pin is rocked into a pre-drilled hole in the vertical surface. Secondly, the panel for the shelf has pre-drilled holes to accommodate the vertical pin on the top of the shelf support. This gives a stable support whilst still allowing the shelf to be   [....]

More details

Shelf Support - Plastic

Requiring an easy press fit into a 5mm pre-drilled hole, this plastic Shelf Support is simple to install. It is manufactured from durable nylon and is designed to accommodate light to medium shelf loads. Typically this product will be used to support boards in shelving, desks and cabinets. Colours available include beige, black,  [....]

More details

Shelf Support - Circular Pin

The ever-popular Circular Pin Shelf Support peg gives a tried-and-trusted solution for quick-and-easy support for shelving. The pin is simply inserted into a pre-drilled hole in the vertical surfaces and the horizontal shelf is placed on top of the protruding pins.

Material - Zinc Alloy.

D = Hole Diameter

More details

Nail-in Glides - Single

Simply tap into position with a lightweight hammer to provide an effective low cost glide. Suitable for permanent or temporary use in a wide variety of applications such as upholstered or office furniture.

Materials - Engineering Plastic (Glide), Mild Steel (Nail).

H = Height

More details

Nail-in Glides - Double

The larger double nail glide is easy to fix in place with a lightweight hammer. These glides are widely used for permanent or temporary use in units such as upholstered furntiure or office furniture.

Materials - Engineering Plastic (Glide), Mild Steel (Nail).

More details

Bookcase Strip

This Bookcase Strip is surface mounted with a load rating of 45kg.

L = Length

More details