Quarter turn fixings that have an 8mm head diameter.

8mm Quarter Turn Dome Head Studs

Easily to apply these Dome Head Quarter Turn Studs just insert through the lid or top panel and then are pressed into the clip on the bottom panel to close. They can be easily released by a quarter turn with either a coin or flat blade screwdriver.

Nominal Load = 80N
Maximum Load = 300N

Material - Brass.

More details

8mm Quarter Turn Wing Head Studs

These Wing Head Quarter Turn Studs are inserted through the lid or top panel and simply pressed into the clip on the bottom panel to close. The wing head makes them easy to release by hand with a simple quarter turn of the stud.

Nominal Load = 80N
Maximum Load = 300N

Material - Brass.

More details

8mm Quarter Turn Knurled Head Studs

These Knurled Head Quarter Turn Studs are easy to install, simply insert through the lid or top panel and press into the clip on the bottom panel to close. Easily released by a quarter turn, the knurl around the outer edge of the head enables users to open by hand. They also have a slot to open with a coin or flat blade screwdri  [....]

More details

8mm Quarter Turn Rivet-on Clips

These Rivet-on Clips are designed to be riveted or screwed into place on the base panel. We also offer Slide-on and Clip-in versions.

Material - Spring Steel.

More details

8mm Quarter Turn Slide-on Clips

These Clips are designed to simply slide onto the edge of a panel and align with a pre-drilled hole. Please see technical drawing for panel cut-out details. Slide-on Clips always have a small space between the loose and fixed panel.

Materials - Stainless Steel, Spring Steel.

More details

8mm Quarter Turn Clip-in Clips

These Clip-in-Clips can be front mounted by simply snapping into pre-cut 9mm square hole, which makes them ideally suited for use on rack mount units. When Clip-In Clips are used there is always a small space between the loose panel and the fixed panel.

Material - Spring Steel.

More details

8mm Quarter Turn Neoprene Washers

These Bi-Fix Quarter Turn Neoprene Washers are used in conjunction with our Bi-Fix Quarter Turn Studs. Retaining the Stud in the top panel, they also seal the hole of the fixed part and reduce vibration.

Temperature range: -40°C to +90°C

Material - Neoprene (EPDM).

More details

8mm Quarter Turn Cup Washers

These 8mm Bi-Fix Quarter Turn Cup Washers are fitted between the stud head and the panel and are designed to prevent marking or scuffing of the panel when turning the stud.

Two types are available, see below.

Materials - Brass/Nickel Plate, Nylon/Black.

More details

8mm Quarter Turn Retaining Springs

This stainless steel Bi-Fix Quarter Turn Retaining Spring is often used in conjunction with a Cup Washer. It is designed to sit under the head of the Stud, providing a back pressure to force the lid closed.

Material - Stainless Steel.

More details