Quarter turn fixings that have a 16mm head diameter.

16mm Quarter Turn Dome Head Studs

Easily to apply these Dome Head Quarter Turn Studs just insert through the lid or top panel and then are pressed into the clip on the bottom panel to close. They can be easily released by a quarter turn with either a coin or flat blade screwdriver.

Nominal Load = 900N
Maximum Load = 2700N

Material - Brass.

More details

16mm Quarter Turn Wing Head Studs

These Wing Head Quarter Turn Studs are inserted through the lid or top panel and simply pressed into the clip on the bottom panel to close. The wing head makes them easy to release by hand with a simple quarter turn of the stud.

Nominal Load = 900N
Maximum Load = 2700N

Material - Brass.

More details

16mm Quarter Turn Knurled Head Studs

These Knurled Head Bi-Fix Quarter Turn Studs are easy to apply, simply insert through the lid or top panel and press into the clip on the bottom panel to close. Easily released by a quarter turn, the knurl around the outer edge of the head enables users to open by hand. They also have a slot to open with a coin or flat blade scr  [....]

More details

16mm Quarter Turn Rivet-on Clips

These Bi-Fix Quarter Turn Rivet-on Clips are designed to be riveted or screwed into place on the base panel. We also offer Slide-on and Clip-in versions.

Materials - Spring Steel, Stainless Steel.

More details

16mm Quarter Turn Clip-in Clips

These Bi-Fix Quarter Turn Clip-in-Clips can be front mounted by simply snapping into pre-cut square hole, which makes them ideally suited for use on rack mount units. When Clip-In Clips are used there is always a small space between the loose panel and the fixed panel.

Material - Spring Steel.

More details

16mm Quarter Turn Neoprene Washers

These 16mm Bi-Fix Quarter Turn Neoprene Washers are used in conjunction with our Bi-Fix Quarter Turn Studs. Their function is to retain the Stud in the top panel, seal the hole of the fixed part and reduce vibration.

Temperature range: -40°C to +90°C

Material - Neoprene.

More details

16mm Quarter Turn Cup Washers

These 16mm Bi-Fix Quarter Turn Cup Washers are fitted between the stud head and the panel. They prevent the marking of the panel when the stud is turned.

Two types are available, see below.

Materials - Brass/Nickel Plate, Nylon/Black.

More details

16mm Quarter Turn Retaining Springs

These stainless steel Bi-Fix Quarter Turn Retaining Springs are often used in conjunction with a Cup Washer. It is designed to sit under the head of the Stud, providing a back pressure to force the lid closed.

Material - Spring Stainless Steel.

More details