The 115 Linear motion friction guides are the latest development under the Accuride brand. This range of plain bearing friction guides for automation and handling systems uses only the highest quality materials as you would expect from Accuride.
Three friction guides types are available; non-adjust, manual adjust and a [....]
The Accuride 2415 drawer slides are designed with linear motion, allowing slide movement to be in a straight line and within a slide’s own length. These slides are suitable for gaming and vending machines, moving control panels and point of sale hardware.
- Load rating up to 18.5kg (80,000 cycles)
- 8mm slide thickn [....]
The Accuride 0115RS drawer slides are designed with linear motion, allowing slide movement to be in a straight line and within a slide’s own length.
- Load rating up to 60kg (horizontal mount)
- Load rating up to 50kg (vertical mount)
- 10,000 cycles
- Retainer synchronisation
The Accuride DA0115RC track is designed for cost-sensitive applications involving any length of travel and designs where space constraints must be considered.
- Load rating up to 130kg (80,000 cycles)
- Aluminium track available in 1.2m and 2.4m lengths
- Customer cuts track to required length
- Customer dri [....]
The Accuride DS0115RC track is designed for applications involving any length of travel and with space constraints. The stainless steel track and system are well suited to catering equipment and clean room environments. Ideal for use with stainless steel cabinets or substrates, where mixing steel types could decrease the integri [....]
The Accuride DP0115-ECRC is a soft-closing mechanism, which provides a quiet and controlled motion when used with the DA0115RC linear motion track, and reduces the possibility of trapped fingers.
- Ideal for controlled closure of sliding access panels and doors
- Pulls in 20kg load on a single cassette in a horizont [....]
The Accuride DA0116RC is a heavy duty aluminium track which comes in 2 lengths: 2.4m and 3.6m. Carriages are available with either stainless steel or polymer ball bearings and are added as required. The customer cuts the tracks to the length required and drills fixing holes on the parallel lines marked.
The parts are s [....]
This Sliding Door Hardware kit from Accuride is an additional part that can be added to the DA0116RC for wall or side mounting. This has been designed specifically for large heavy doors requiring a minimum effort to operate; typically 20N to move a 180kg door.
- Mounting kit for top hung sliding doors
- Use with DA0 [....]