Manufactured from 50 micron thick PVC, these security seals are designed to be extremely difficult to remove and will fragment if any attempt to remove the security label is made. Stocked in white as standard with sequential numbering, the destruct-a-seal can also be supplied in a variety of colours with customer logo and bar-coding if required. Two sizes of this security seal are available as standard - 25mm x 47mm and 40mm x 40mm.

This security label has a multitude of uses and can be utilised both inside and outdoors. The destruct-a-seal incorporates a strong, acrylic based adhesive that achieves maximum strength after 24 hours, when applied to a clean, grease-free surface.

Product Specification:
Designed to apply direct to a product with excellent destructibility upon attempts to remove this seal.

Material:
50 micron Destructible PVC Face Material
Strong Permanent Acrylic Based Adhesive
Silicone Coated Release Liner.

Standard Material Colours:
White - standard
Black
Yellow
Silver
Clear

Printing:
Your Corporate Logo/Name can be printed in up to 6 colours. Variable overprint available eg. consecutive numbering and barcodes . Bespoke or generic holograms can be added to the seal.

Standard Sizes:
25 x 47mm
40 x 40mm

Standard Roll Presentation:
100 seals per roll.

Typical Applications:
High value electronic items, automotive, software packaging,cosmetics, asset identification, property security marking. This product has proven high performance in a wide variety of end uses. Additional security slits can be added for higher tamper evidence and security if needed.

Storage:
Product should be stored in original packaging away fromdirect sunlight. Store at 22°C/50% RH. Typical shelf life of the product is 2 years from date of manufacture.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 2 and 6 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrLxW
Destruct-a-Seal - NumberedSLA01347 x 25

All dimensions are mm unless specified.