Cam-Stay is a manually operated telescopic multi-positional stay designed to support weights up to 135kg. All Cam-Stays are universal and can be mounted with the holding slots up or down. Mounting of the stays can either be directly to your application through the holes or by mounting brackets.

Basic Cam-Stay: To operate, slightly extend the arm from its closed state until it locates into the desired holding position. To close the unit, fully extend the stay before returning it to the closed position. The Basic Cam-Stay is available with 5 or 10 holding positions.

Reversible Cam-Stay: Extend the arm from its closed position until it locates into the desired holding position. It can be closed between any holding positons, and does not need to be fully extended before closing. To close the stay, simply extend it slightly out of its current holding position and close. The Reversible Cam-Stay is available with 6 holding positions.

Typical applications include access hatches or panels, machine guards, desk lids, storage boxes, tool and site boxes, hospital and physio beds, display panels and signage.

Material - Carbon steel
Finish - Clear passivate

Notes:

  • All dimensions are for reference only with no tolerances
  • If the application is too heavy or cumbersome, a Camloc gas strut can provide additional lift assistance
  • Max. load: 1350N / 135kg
  • Warranty: one year
  • Life expectancy: 20,000 locks
  • Material thickness: arm: 3mm, housing: 2mm

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 7 and 1 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrABCDEF
Basic Cam Stay - 5 PositionsD0S04514187131352228
Basic Cam Stay - 10 PositionsD0S0462141591313117369
Reversible Cam Stay - 6 PositionsD0S0472141551426118369

All dimensions are mm unless specified.