This type of pushnut is designed to strike a good balance between maximum holding strength and a reasonable push-on force. Along with the metric version it is the most economical fastener of its kind available.

Pushnuts can be applied very rapidly. Pushing this fastener onto a rod (especially with an air hammer) is much quicker than screwing on nuts.

These fasteners are especially suitable for products shipped in knock-down form.

Typical applications of these fixings include toys, golf trolleys, motor vehicles, domestic appliances.

F1 = Maximum Push-on Force in Newtons.
F2 = Minimum Holding Strength in Newtons.

Material - Austempered Carbon Steel.

Stud diameter in the table below is given in inches.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 3 and 3 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrStudDHF1F2
ImperialPUN0531/165.01.089445
 PUN0543/325.01.0111801
 PUN0551/86.40.81561,112
 PUN0561/89.51.31161,558
 PUN0435/3211.11.267267
 PUN0573/1611.11.467890
 PUN0583/1611.11.61111,780
 PUN0591/413.51.51111,780
 PUN0601/413.51.72002,670
 PUN0615/1611.91.01781,200
 PUN0625/1615.91.61802,900
 PUN0635/1615.91.82701,110
 PUN0645/1623.82.5801,112
 PUN0653/819.11.52223,115
 PUN0663/819.12.13784,900
 PUN0673/823.82.5981,560
 PUN0687/1622.22.5 3346,675
 PUN0697/1623.81.91342,225
 PUN0701/225.42.87128,900
 PUN0715/825.41.92226,230

All dimensions are mm unless specified.

Associated Products