The 14-28 range of Camloc Vari-Lift Gas Springs are recommended for panel weights of 150kg to 350kg. Spring force can be varied from 20kg to 250kg, with stroke lengths from 60mm to 500mm.
Our Camloc Swift & Sure Variable Lift Gas Springs from Arvin Meritor are available in an extensive range of sizes, with a wide range of End Connectors and Brackets for a variety of applications.
When Gas Springs are used, it is often found that theoretical forces will be incorrect because factors such as hinge friction and perceived speed of action will have a bearing on calculations.
Variable Lift Gas Springs overcome this problem as they can be adjusted to meet individual preferences, and can also be adjusted whilst in position, saving you both time and effort.
These Camloc Gas Springs are charged to their maximum force during manufacture. By using the standard tool provided, gas can be gradually released via the Vari-Lift valve to provide the force suited to your application. Once this has been established, we are able to measure this force and provide fixed force Gas Springs to your precise requirement if necessary.
WARNING: The force can be adjusted downwards only. (See Vari-Lift Adjustment Instructions for further clarification).
- No need to calculate force
- Adjustable to any force within the range
- Force can be adjusted after installation
- Simple adjustment using standard tool supplied
- Ideal for prototyping and short production runs
- Ideal where application weights vary
For Clevis Joint use GSA032
For Flat Eye Connector use GSA017
1 = 1 Gas Spring