Metal Edge-Fitting Cable Tie Mounting Bases from JET PRESS
These metal edge-fitting mounting bases clip onto the edge of panels and give an anchor point for cable ties.

The clip is pushed or tapped onto the panel edge and the barbs of the fastener hold it securely in place. The raised slot on the surface of the clip can accommodate standard or a releasable cable ties of up to 5.8mm wide.

These clips offer a robust solution for securing runs of cables, pipes, or hoses along the edge of a sheet metal panel.
Material - Carbon Steel

P = Panel thickness
L = Length
W1 = Width
W2 = Maximum Cable Tie width
H = Height
M = Material thickness

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 3 and 2 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrPLW1HW2M
Edge FittingCAT2760.8-1.20.8-1.21615.750.5

All dimensions are mm unless specified.