We stock a standard range of joint solutions including V Band Clamps, Band Clamps, Slip Joint Assemblies and Mounting Straps.

Along with the standard product range we can also offer bespoke clamp solutions that are designed to suit your application or existing flanges. Please contact us for details.

 

About V Band Clamps
V Band Clamps can be manufactured in diameters from 50mm up to 3000mm. With over 6000 clamp variations and 400 standard V flange retainer profiles, there is a solution to suit your proposed or existing flange geometry.

V Band Clamps can operate within gas temperatures up to 1100°C, and pressures up to 200 bar.

V Band Clamps are offered in high grade manufacturing materials to include Stainless Steel Grades 304, 316, 409, 441, A286, Inconel Grades 625 and 718 or Aircraft Grade Aluminium.

There are 3 main closure types available, T-bolted, quick coupler and lever assembly.

 

About Band Clamps
Band Clamps can be offered in diameters from 50mm up to 3000mm. There are 3 main closure types available,T-bolted, quick coupler and lever assembly.

Double bolted assemblies can also be supplied for larger diameter clamps to provide more even application force and to allow a broader adjustment range (single bolted clamp provides +/- 5mm adjustment range, double bolted clamp provides +/- 10mm adjustment range).

Strap thicknesses range from 0.6mm to 1.6mm with strap widths available from 19mm to 50mm.

Band Clamps are offered in high grade manufacturing materials to include Stainless Steel Grades 304, 316, 409, 441, A286 and Inconel 718.

 

About Slip Joint Assemblies

Slip Joint

Slip Joint Assemblies have been designed to replace existing bolted or welded flange systems using fewer parts, slip joint systems are easy to assemble providing a reduction in installation and maintenance time. Slip Joint Assemblies can be manufactured to suit pipe diameters from 35mm to 350mm.

The Slip Joint Assembly consists of three parts - sliding catch flange (slip flare), V band clamp, and trapezoidal seal. In addition the system requires for the unflared pipe to be free-running within the flared mating pipe, allowing assembly of the joint to take place prior to final positioning of the joint.

The Slip Joint Assembly is an easy to fit all-in-one system that does not require welded flanges or additional gaskets. The joint assembly is quickly and easily achieved by slipping the seal and slip joint over the unflared pipe and pushed against the pre-formed flare of the mating pipe. The joint is finally achieved by placing the v band clamp over the assembly and torqueing to the required pressure by means of the clamping bolt and nut assembly.

Once installed the Slip Joint Assembly can accept some small axial and radial misalignment of the mating pipes.

The style of V band clamp that is used pull the assembly together can be offered in a variety of styles normally with either T-bolted or quick release closure mechanisms.

Slip Joint Assemblies can operate within gas temperatures up to 750°C. Pressure ratings vary depending on the application. The standard gasket seal is supplied in Graphite for hot gas applications, however other gasket seal materials can be offered upon request to suit other fluid/gas types.

Slip Joint Assemblies are offered in high grade manufacturing materials to include Stainless Steel Grades 304, 316, 409, 441 and A286.

 

About Mounting Straps

Mounting Strap

Tank Straps and Mounting systems are normally designed to suit the specific customer requirement. They are used in many applications including fluid tank mounting, hatch straps, container mounting systems, and filter mounts.

Straps can be supplied in lengths of up to 3000mm, with material ranges from 0.6mm up to 1.6mm.

Mounting Straps are offered in high grade manufacturing materials to include Stainless Steel Grades 304, 316, 409, 441, A286, and Inconel 718.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 2 and 8 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

Other Products in Teconnex Stainless Steel Band Clamps