Plinth Adjusters and Brackets from JET PRESS

For support and adjustment, our plinth adjusters and brackets offer a robust solution.

Bracket Mounted Adjusters

A robust height adjustment and levelling system for cabinets, cupboards, etc. where an uneven or sloping floor has to be catered for. The U bracket can be used with either of the two adjusters.

- Internal adjustment is by slotted screwdriver and external adjustment by means of a hexagon spanner.

Materials - Mi  [....]

More details

Plinth Adjuster with Bracket Type 1

The Bracket is easily positioned on the bottom edge of the panel and secured with 2 screws through the holes provided. The panel weight is evenly supported by the bracket reducing the risk of damage to the plinth or cabinet..

A simple adjustment with a 4mm allen key allows the free rotating foot to be set to the correc  [....]

More details

Plinth Adjuster with Bracket Type 2

This lighter duty Plinth Adjuster and Bracket is ideal for use with thinner panels and provides excellent bottom edge support.

Once securely fitted by utilising 2 screws through the easy to access holes a final adjustment is all that is needed with a 4mm allen key to lower the foot to the precise height required.

More details

Plinth Adjuster with Bracket Type 3

A plinth adjuster to be used where bottom support is not directly needed or desired. Fixed by means of a locating pin into a pilot hole in the board and 2 screws this then provides a firm stable support.

Final adjustment by screwing the foot up or down with a 4mm hex key acquires the specific height. The articulating fo  [....]

More details

Plinth Adjusters with Bracket

These all-in-one bracket height adjusters provide up to 20mm of adjustment and are available for cabinet weights up to 100kg and 150kg. The adjuster is simply hammered into the carcass and secured by 2 woodscrews (not supplied).

Note: Adjustment of the plastic foot is effected by a 4mm allen key through a pre-drilled h  [....]

More details

Inset Plinth Adjuster

This Inset Plinth Adjuster is ideal for heavy-duty applications with a load rating of up to 400kg and can be used where there is no plinth gap. Simply recess into a 28mm hole where adjustment can be made of up to 10mm using a 4mm allen key.

Material - Nylon, Mild Steel

More details