Salice Hinges & Plates from JET PRESS

For all your hinge requirements, Salice offer a quality range of products for cabinet door operation.

Salice 110° Push-to-Open Hinges

These Salice push-to-open, push-to-close 110° hinges are equipped with a special spring that acts to open the door independently. Ideal for a sleek, ultra-modern kitchen, bedroom or bathroom cabinets without handles.

- Compatible with all Salice hinge plates
- Intergrates with the Salice push-to-open hinge system

More details

Salice 165° Push-to-Open Hinges

These Salice push-to-open, push-to-close 165° hinges are ideal for a sleek, ultra-modern kitchen, bedroom or bathroom cabinets where handles are not required.

- Compatible with all Salice hinge plates
- Intergrates with the Salice push-to-open hinge system

Material - Steel.

More details

Salice Push-to-Open Catch

This Salice Push-to-Open Latch integrates with all push-to-open hinges. Easily fitted to cabinets allowing doors to open without handles or knobs. Push gently on the door and it will open.

The Catch comprises of a catch, plate, screws and decorative cover plates.

Standard finish - Grey.
Alternative finish  [....]

More details

Salice Push-to-Open Magnetic Catch and Plate

This Salice Magnetic Catch and screw-on Plate can be fitted into the top, side or base of the cabinet by drilling a 10mm diameter hole and a depth of 40mm. To position the plate, attach it to the end of the magnetic catch and close the cabinet door. The point of the plate will show where to insert it on the door, simply press t  [....]

More details

Salice Push-to-Open Holder

This Salice grey plastic Push-to-Open Holder is non-adjustable and is used in conjunction with the DPM series of magnetic push catches. See associated products below.

Insert the catch into the holder and place the holder at the top, side or the base of the cabinet. Fix into place using wood screws and the drilling patte  [....]

More details

Salice Push-to-Open Holder - Adjustable

This Salice grey plastic Push-to-Open Holder is adjustable and is used in conjunction with the DPM series of magnetic push to open catches. See associated products below.

Insert the catch into the holder and place the holder at the top, side or the base of the cabinet. Fix into place using wood screws and the drilling v  [....]

More details

Salice Push-to-Open Adjustable Holder

This Salice adjustable Holder and Screw Cover (HIN181 see associated products below) are used in conjunction with the DPM series of magnetic push-to-open catches.

Insert the catch into the holder and place the holder at the top, side or the base of the cabinet. Fix into place using wood screws and the drilling value 8+  [....]

More details

Salice 110° Clip-on Hinges

These standard sprung cabinet hinges from Salice feature a 35mm cup and allow cupboard doors to open to 110°. Available in designs for full overlay, half overlay, part overlay and inset they are easily attached by screws to the cupboard doors and carcasses. Fine alignment can be made after installation by turning the integral ad  [....]

More details

Salice 165° Clip-on Hinges

Salice 165° Hinges can used in various cabinet designs where a wide opening hinge is required. They have achieved FIRA Gold Accreditation which indicates they are manufactured to the highest quality.

- Compatible with all of the Salice Mounting Plates

Material - Steel.

More details

Salice 105° Clip-on Hinges - Soft-Closing

Silentia hinges by Salice have an integrated soft-close mechanism built into the hinge cup. The hinges have a 105° opening capacity and are available to accommodate a variety of different overlays.

- Have a hole depth of 12mm
- Suitable for use on lightweight doors
- Compatible with all Salice hinge mounting p  [....]

More details

Salice 110° Slide-on Hinges

The Salice Slide-on Hinges have a 110° opening capacity are manufactured to the highest quality. They can be used in new designs or as an upgrade to existing units, and are compatible with all Salice slide-on hinge mounting plates.

Material - Mild Steel.

More details

Salice 94° Slide-on Mini Hinges

The Salice Mini Slide-on Hinges have a 94° opening capacity are manufactured to the highest quality. They can be used in new designs or as an upgrade to existing units, and are compatible with all Salice slide-on hinge mounting plates.

Material - Mild Steel.

More details

Salice Hinge Mounting Plates - Clip On Cruciform

These Salice Clip On Mounting Plates are compatible with all Silentia and 200 Series Hinges, providing flexibility in choice of carcase fitting, and a unique cam adjustment system allowing movement of door position whilst in situ.

H= Height.

Material - Diecast Alloy.
Finishes - Nickel, HIP040 also available  [....]

More details

Salice Hinge Mounting Plates - Clip On Straight

These Salice Clip On Mounting Plates are compatible with all Silentia and 200 Series Hinges, providing flexibility in choice of carcase fitting, and a unique cam adjustment system allowing movement of door position whilst in situ.

Material - Diecast Alloy.

H= Height

More details

Salice Hinge Mounting Plates - Slide On Cruciform

These conventional Salice Slide on Mounting Plates are compatible with all Silentia and 200 Series Hinges and provide a wide choice of fitting methods to cater for existing and new build applications.

Material - Steel.

H= Height

More details

Salice Hinge Screw Cover Plate

A decorative cover available in titanium or nickel plated, these Salice hinge cover caps fit onto the Salice hinge arm and the push-to-open housing.

See Salice push-to-open adjustable holder in associated products below.

Material - Steel.
Finishes - Nickel Plated, Titanium.

More details

Salice Hinge Flange Cover Plate

This range of titanium or nickel plated Salice hinge flange cover plates fit onto the Salice hinge arm providing a decorative cover concealing any unwanted screw holes.

Material - Steel.
Finishes - Nickel Plated, Titanium.

More details