Lock Nuts & Lock Washers from JET PRESS

Prevent nuts from loosening because of vibration or dynamic load

Lock Nuts and Lock Washers are used in applications where vibration or movement might cause a nut and bolt to work loose.

When a Palnut Regular Lock Nut is used the force generated by the nut being tightened down pushes the teeth of the thread form down the thread helix. This results in the ends of the teeth biting into the root of the thread on the bolt. This generates a reproducible locking force. Note that both the nut and the bolt are prevented from loosening. This is not true of all locking systems. The same principle applies when used as a Lock Nut for heavy duty applications with a load bearing nut or as a load bearing nut on its own. Palnuts come in a range of sizes and there are Hot Dip Galvanised options with increased corrosion resistance.

Nord-Lock Washers secure bolted joints where vibration or movement might cause a bolt to work loose. They are suitable for Tapped Holes, Counterbores, Through-holes, Stud Bolts and applications with large/slotted holes or soft underlying surfaces. Locking washers are used in pairs. The washers have teeth and when the bolt is tightened the teeth grip and locks the nut and bolt in place even if there is vibration or movement that may be caused for instance by wind, acceleration or other types of dynamic load.

If you require samples, prices or further information please contact our sales team online or ring +44 1623 551 800.

Palnut Regular Lock Nuts - DIN7967

Palnut Regular Lock Nuts secure bolts in applications where vibration or dynamic load might cause them to become loose.
These Palnut Regular Lock Nuts are a cost effective solution. They are inexpensive and do not require a torque wrench to install them, so installation is quick and easy. The installer turns the Lock Nut to  [....]

More details

Palnut Regular Lock Nuts - Hot Dip Galvanised

Hot Dip Galvanised Palnut Regular Lock Nuts offer corrosion resistance up 1,000 hours of salt spray. This makes them suitable for outdoor use like electricity pylons. Because the galvanisation adds a layer to the surface of the Lock Nut they are made slightly oversize so they still spin freely on to the bolt.

These Paln  [....]

More details

Nord-Lock Washers for Nuts - DIN 25201

Nord-Lock Washers prevent nuts and bolts from becoming loose because of vibration or dynamic load. They have a wedge-locking action which uses tension rather than friction. They can only be used in conjunction with a conventional bolt. The rise of the cams between the Nord-Lock Locking Washers is greater than the pitch of the bo  [....]

More details