Heyco Liquid Tight Strain Relief Bushings from JET PRESS
These Heyco Liquid Tight Strain Relief Bushings seal cable entries from moisture and dirt whilst protecting the cable from stress, kinking and bending. Liquid Tight Strain Relief Bushings are fast and easy to install and can be pre-assembled to the cable prior to installation with the aid of our hand pliers.

Heyco Liquid Tight Strain Relief Bushings have a low profile design and the height above the panel is less than 4.8mm. Made from co-molded nylon and elastomer, these Liquid Tight Strain Relief Bushings have smooth, rounded interior edges for ease of installation.

• Fast and easy installation using our hand plier
• Available for cable diameters from 7.1mm - 11.2mm
• Low profile design with height above panel less than 4.8mm
• Can be pre-assembled to the cable prior to installation


Notes:
• We recommend using the fitting with the smallest maximum diameter that will fit your application
• Meets UL strain relief requirements without bending or kinking the cable

D = Head Diameter
D1 = Cable Diameter Range

Material - Nylon 6/6 w/TPE Top
Flammability Rating 94V-2
Temperature Range: -40°C to 100°C
IP Rating: IP65, 66, 67, 68 (IP68 is 25psi for 24 hours)

Certifications:
• Recognised under UL File E51579


For samples, prices or further information please click the enquiry button or ring +44 1623 551 800.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 1 and 2 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrDD1PH
Liquid Tight Strain Relief BushingSRB06032.87.1 - 8.42.425.1
 SRB06132.87.1 - 8.44.825.1
 SRB06232.88.4 - 11.22.425.1
 SRB06332.88.4 - 11.24.825.1
Cast PlierPLI045 - - - -
Nylon Plier AdaptorPLI046 - - - -

All dimensions are mm unless specified.