Anti-Strip Screw Grommets from JET PRESS
The key feature of this design of Screw Grommet Captive Nut is the robust receiving hole for the screw. This strength was developed to allow the use of a powered screwdriver when inserting a screw into the component, giving a much reduced risk of stripping the cut thread in the plastic. Up to six screwing on and off operations are achievable without the loss of grip by this fixing.

Screw sizes are shown in the table in both imperial and metric (ST) form.

Typical applications include vehicle fascias and trims, electrical circuit boards and the panels of domestic appliances.

Type 1 - Open Type, allowing any length of screw to be used through the grommet.
Type 2 - Closed Type, sealing the screw thread.

Material - 30% Glass Filled Nylon.
Typical Colour - Natural.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 4 and 8 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrScrewSizeLWPH1H2Type
Anti-StripCAN1398ST -
 CAN1408ST - 1.23.0142

All dimensions are mm unless specified.