Bolt Retainers from JET PRESS
These Bolt Retainers are designed to be pushed onto a screw or bolt to prevent it from falling out of a hole while en-route to final assembly. They slide smoothly down either fine or coarse pitched threads and hold firmly at any point.

When a panel or component is then installed and fastened with a nut, the retainer is simply left in place. The flexible teeth fold flat, ensuring minimal increase to the overall thickness of the assembly.

Typical applications include toys, motor vehicles, trolleys, electrical equipment, telecom equipment and domestic equipment.

F1 = Maximum Push-on Force in Newtons.
F2 = Minimum Holding Strength in Newtons.

Material - Austempered Carbon Steel.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 3 and 7 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrThreadDHTF1F2
Bolt RetainerB0R004M49.51.30.398223

All dimensions are mm unless specified.