Flat Round Pushnuts - Push On Fasteners from JET PRESS
This Flat Round Pushnut is a very cost effective option. This fastener provides a good balance between maximum holding strength and reasonable push on force. Pushnuts can be applied with great speed, as pushing on (especially with an air hammer) is much faster than running down nuts. These fasteners are especially suitable for products shipped in knock-down form.

• Quick and easy to install
• Economical
• Good for products in knock-down form
• Shock resistant
• Distortion resistant
• Multiple sizes

Typical applications for these pushnuts include motor vehicles, domestic appliances, toys and golf trolleys.

F1 = Maximum Push-on Force in Newtons.
F2 = Minimum Holding Strength in Newtons.

Material - Austempered Carbon Steel
Stud diameter in the table below is given in inches.

For samples, prices or further information please click the enquiry button or ring +44 1623 551 800.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 5 and 1 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrStudDHF1F2
Flat Round Pushnut ImperialPUN0531/165.01.089445
 PUN0687/1622.22.5 3346,675
Flat Round Pushnut MetricPUN072411.11.267267

All dimensions are mm unless specified.