Quarter Turn Captive Panel Latch from JET PRESS
This quarter turn latch is a two-piece moulding which is delivered attached to one another but is easily separated with slight finger pressure. The parts are a non-corrosive, non-conductive alternative to metal types. It is installed by inserting into the prepared holes in both panels and driving the head section into the body with a hammer.

A quarter turn of the plunger, with a screwdriver or coin, releases the part so that access can be gained as required. The whole Latch is held captive in the panel, thus eliminating the possibility of lost components during installation and use.

Typical applications for this quarter turn latch include cabinets, domestic appliances, motor vehicles and metal enclosures.

Material - Acetal
Typical Colours - Natural, Black

For samples, prices or further information please click the enquiry button or ring +44 1623 551 800.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 5 and 1 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrD1D2P1P2
LatchQTS1519.0 x 9.09.5 x 9.51.0 - 1.41.0 - 2.8

All dimensions are mm unless specified.

Other Products in Quarter Turn Fasteners