The Accuride DA0116RC is an exceptional heavy-duty Linear Motion Track/Guide capable of supporting loads up to 600kg. This aluminium linear guide rail is available in 2 lengths: 2.4m and 3.6m. The recirculating ball carriages are available with either stainless steel or polymer ball bearings, the polymer ball bearings are the quieter option and require less maintenance, however, the stainless steel ball bearings are recommended to support heavier loads.
The parts are sold separately to give the user maximum flexibility. The damper cushions and decelerates the last 40mm of travel. End stops are not required if the damper is used.
Additional parts can be purchased to turn the DA0116RC into a sliding door hardware kit for wall/side mounting.
- Load rating up to 600kg (tested up to 100,000 metres)
- Linear motion guide and recirculating ball carriage
- Aluminium track available in 2.4m and 3.6m lengths
- Customer cuts the track to the required length and drills mounting holes
- Corrosion-resistant
- Modular system which is highly adaptable
- Additional parts available to turn into a sliding door hardware kit
- Suitable for flat mounting
- Temperature -20ºC to +70ºC
- DP - 500 hours salt spray test
Material: Track - Aluminium. Carriage - Stainless Steel and Nylon.
Notes:
- Fix the track as recommended on a rigid and level surface
- Care must be taken while sliding the carriage into the track
- Can be used upright as a non-load bearing guide
- For vertical and horizontal (flat) mounting
- Distribute weight evenly across carriage(s)
- Not recommended for high torque applications
- Carriages sold separately, available with stainless steel balls or polymer balls
- End stops sold separately
- Optional damper with bracket
- Optional door mounting kit
- See attached datasheet for further information on carriages
Material - Aluminium
W = Weight per individual slide (kg)
