Accuride 3308 Drawer Runners, also known as Drawer Slides with Front Disconnect, are designed for use in industrial drawers and electronic enclosure applications. They have a lock-in/lock-out feature which allows slides to be open or closed until a lever is used to release the lock. These slides also have a front disconnect, allowing a lever or push latch to be positioned near the front of the slides for easy operation of the disconnect function.
- Load rating up to 68kg (10,000 cycles) per pair
- 100%+ extension
- 12.7mm slide thickness
- Handed slide assembly
- Lock-in
- Lock-out
- Front disconnect
- Optional enclosure mounting brackets
- Suitable for horizontal (flat) mounting
- Flat mounting reduces load rating by 75%
- Fixing hardware included
- Temperature -20°C to +70°C
- 12 hours salt spray test
Kit includes:
- 2 x Slides
- 16 x Screws
- 16 x Plain washers
- 16 x Lock washers
- 16 x Nuts
Notes:
- Fixing hardware included
- M4 screws fixing recommendation
- Horizontally (flat) mounting slides reduces the load capacity to at least 25% of the vertical (side) mount capacity
- Load ratings quoted are the max. for a pair of side mounted slides installed 450mm apart, unless otherwise stated
- † Hole not available for SBB056
- For enclosure mounting brackets, refer to “Accuride Enclosure Mounting Bracket Kits” section
- See cable carriers for further information
Material - Mild Steel
Finish - Zinc Plate & Passivate
SL = Slide Length
TR = Travel
W = Weight of slide (kg) - per pair
L = Load capacity of slide (kg) - per pair
