Accuride 3832 HDTR Drawer Runners, also known as Drawer Slides have a strong pull-in force for more demanding applications and are designed with touch release to allow users to push the front of the drawer to open or close. They have a front disconnect feature, allowing a lever or push latch to be positioned near the front of the slides for easy operation of the disconnect function. These slides also have a hold-in feature to keep slides closed until extra force is applied.
- Load rating up to 45kg (80,000 cycles) per pair
- 100% extension
- Touch release - push drawer front to open or close
- Opens drawers approximately 50-125mm from the closed position
- Activation force - 3.5kg
- Stay-closed feature
- 12.7mm slide thickness
- Front disconnect
- Hold-in
- Cam drawer adjust (3.2mm)
- Not suitable for flat mounting
- Temperature -20°C to +70°C
- 12 hours salt spray test
- Sold in pairs
Notes:
- The fixing recommendation is M4 screw/4mm wood screw/6mm Euro screw
- Sold in pairs
- Maximum head height 2.5mm/9.6mm diameter
- Use for side (vertical) mount only
- Drawer width should not exceed slide length
- Not for lateral file drawer applications or where the drawer is wider than it is deep
- Load ratings quoted are the maximum for a pair of side mounted slides installed 450mm apart, unless otherwise stated
Material - Mild Steel
Finish - Zinc Plate & Passivate
SL = Slide Length
TR = Travel
W = Weight of slide (kg) - per pair
L = Load capacity of slide (kg) - per pair