Accuride 7957 Heavy Duty Drawer Runners, also known as Drawer Slides are designed with a disconnect feature that allows easy installation and simple drawer removal. These slides are suitable for use in Rock n Roll beds, machine building, electronics access and storage applications.
- Load rating up to 160kg (80,000 cycles) per pair
- 100% extension
- 19.1mm slide thickness
- Front disconnect
- Hold-in
- Suitable for drawers up to 1000mm wide
- Stocked in 13 lengths up to 914.4mm
- Suitable for horizontal (flat) mounting
- Flat mounting reduces load rating by 75%
- Optional bracket accessory kits available
- Temperature -20°C to +70°C
- DZ - 12 hours salt spray test
- Sold in pairs
Notes:
- M5/M6 countersunk screw fixing recommendation
- For optional mounting brackets see 634 Bracket Kits. The fixings included will not fit the 7957 slide, we recommend using M6 countersunk screws
- Slides sold in pairs
- A centrally positioned pull handle is recommended when used on wide drawers
- Handed slide assembly - levers move in same direction when pair of slides installed
- Horizontally (flat) mounting slides reduces the load capacity to at least 25% of the vertical (side) mount capacity
Material - Mild Steel
Finish - Zinc Plate & Passivate
SL = Slide Length (mm)
TR = Travel (+ or - 3.3)
W = Weight per pair of slides (kg) - per pair
L1 = Load rating per pair of slides (kg) - per pair
