Palnut Regular Lock Nuts - Hot Dip Galvanised

Palnut Regular Locknuts - Hot Dip Galvanised
Palnut Regular Locknuts - Hot Dip Galvanised
Regular LockNuts - Hot Dip Galvanised Application
Regular LockNuts - Hot Dip Galvanised Application

Gallery


Palnut Regular Lock Nuts - Hot Dip Galvanised slide 1
Palnut Regular Lock Nuts - Hot Dip Galvanised slide 2

Palnut Regular Lock Nuts - Hot Dip Galvanised

Hot Dip Galvanised Palnut Regular Lock Nuts offer corrosion resistance up 1,000 hours of salt spray. This makes them suitable for outdoor use like electricity pylons. Because the galvanisation adds a layer to the surface of the Lock Nut they are made slightly oversize so they still spin freely on to the bolt.

These Palnut Regular Lock Nuts are a cost effective solution. They are inexpensive and do not require a torque wrench to install them, so installation is quick and easy. The installer turns the Lock Nut to finger tight then uses a spanner to tighten them a further third to half a turn. Once properly tightened, the hex face becomes slightly concave. This means they can be checked with a simple visual inspection which is less expensive than other Lock Nut systems.

Under M5 they can be used alone, for M6 and above they must be used in conjunction with a regular full nut.

Manufactured to DIN7967 standards

Advantages:
• Resists loosening caused by vibration or movement
• Improves structural integrity and performance
• Ease of assembly
• Low cost

Typical applications:
Construction Equipment, Pipework, Agricultural Equipment, Manufacturing Equipment.

Material - Austempered Carbon Steel

Are you looking for further information, samples, CAD files or prices?

Please contact our customer service team or use the "Request Samples" button next to the product variations below.

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

Dimension guide

Click the thumbnail to enlarge
Download Dimension Guide
Palnut Regular Lock Nuts - Hot Dip Galvanised dimension guide

Product Variations

Code Description Thread H W
REL041 Hot Dip Galvanised M12 5.8 19.0 Request Free Samples
REL042 Hot Dip Galvanised M16 5.9 24.0 Request Free Samples
REL060 Hot Dip Galvanised M20 7.0 30.0 Request Free Samples
REL065 Hot Dip Galvanised M24 8.0 35.0 Request Free Samples

All dimensions are mm unless specified.

Back To Top