These Heyco® Liquid Tight Strain Relief Bushings seal cable entries from moisture and dirt whilst protecting the cable from stress, kinking and bending. Liquid Tight Strain Relief Bushings are fast and easy to install and can be pre-assembled to the cable prior to installation with the aid of our hand pliers.
Liquid Tight Strain Relief Bushings have a low profile design and the height above the panel is less than 4.8mm. Made from co-molded nylon and elastomer, these Liquid Tight Strain Relief Bushings have smooth, rounded interior edges for ease of installation.
- Fast and easy installation using our hand plier
- Available for cable diameters from 7.1mm - 11.2mm
- For mounting hole 22.2mm
- Low profile design with height above panel less than 4.8mm
- Can be pre-assembled to the cable prior to installation
Notes:
• We recommend using the fitting with the smallest maximum diameter that will fit your application
• Meets UL strain relief requirements without bending or kinking the cable
D = Head Diameter
D1 = Cable Diameter Range
Material - Nylon 6/6 w/TPE Top
Flammability Rating 94V-2
Temperature Range: -40°C to 100°C
IP Rating: IP65, 66, 67, 68 (IP68 is 25psi for 24 hours)
Certifications:
• Recognised under UL File E51579
