Inverted Screw Grommets from JET PRESS
This selection of Inverted Screw Grommets differs from standard screw grommets in that the split in the nut is at the end where the screw is inserted. This split allows the grommet to be easily inserted into a panel. The application of a self-tapping screw into the grommet ensures that the component is held firmly in place after use. The Inverted Screw Grommet snaps into various panel thicknesses and with a suitable screw, enables panels or components to be securely fastened.

They can differ slightly in appearance from the images shown, depending on type, but all have an open end allowing the end of long screws to pass through.

Screw sizes are shown in the table in both imperial and metric (ST) form.

As with other types of Screw Grommet, applications can be found in a very wide variety of industries where a screw thread is required in a panel (that is often a steel panel).

Material - Nylon.
Typical Colours - Natural, Black.

You can contact us about this product directly on the form below. Please send us the details of any question, or help that we can provide you.

Please add 6 and 3 and type the answer here:

Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.

DescriptionPart NrScrewSizePDTHW
InvertedCAN0966ST 3.50.85.0 x 5.02.08.04.8 x 7.5
 CAN0816ST 3.50.95.50.710.09.0
 CAN0578ST 4.20.8 - 2.37.60.812.712.7
 CAN0588 - 10ST 4.2 - 4.80.8 - 2.06.9 x 6.91.310.79.5 x 9.5
 CAN0788 - 10ST 4.2 - 4.80.8 - 2.06.9 x 9.41.210.79.5 x 9.5
 CAN1228 - 10ST 4.2 - 4.80.9 - 1.09.5 x 9.52.010.015.0 x 15.0
 CAN10110ST 4.80.7 - 1.57.0 x 7.01.011.09.5 x 9.5
 CAN11210ST 4.80.7 - 2.07.4 x 7.41.013.012.0
 CAN11510ST 4.81.59.5 x 9.52.010.015.0 x 15.0
 CAN03012ST 5.50.8 - 1.28.3 x 8.30.811.211.0 x 11.0
 CAN12114ST 6.30.9 - 1.09.5 x 9.52.09.915.1 x 15.1

All dimensions are mm unless specified.