These Accuride 3832 DO Detent Out Drawer Runners, also known as Drawer Slides are designed with a hold-out feature to keep slides open until extra force is applied. They have a front disconnect, allowing a lever or push latch to be positioned near the front of the slides for easy operation of the disconnect function. These slides also have a hold-in feature to keep slides closed until extra force is applied.
- Load rating up to 45kg (80,000 cycles), or 50kg (10,000 cycles) per pair
- 100% extension
- Hold-out in open position
- 12.7mm slide thickness (14mm with mounting bracket)
- Optional clip-on bracket for bottom & platform mounting
- Front disconnect
- Hold-in
- Cam drawer adjust (3.2mm)
- Not suitable for flat mounting
- Temperature -20°C to +70°C
- 12 hours salt spray test
- Sold in pairs
Notes:
- Fixing recommendation is M4 screw/4mm wood screw/6mm Euro screw
- Maximum head height 2.5mm/9.6mm diameter
- Horizontal mounting not recommended
- Load ratings quoted are the maximum for a pair of side mounted slides installed 450mm apart, unless otherwise stated
- Please refer to technical drawing for hole exceptions
- View Optional clip-on bracket for bottom & platform mounting
Material - Mild Steel
Finish - Zinc Plate & Passivate
SL = Slide Length
TR = Travel
W = Weight of slide (kg) - per pair
L1 = Load rating of slides 10,000 cycles (kg))
L2 = Load rating of slides 80,000 cycles (kg))
